You must have javascript enabled to use air-compressor.org !

STOP KNEADING CLAY! WHITE NEVERknead DIY PARTS KIT Polymer Clay

Condition Tool

USD $59.95

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Crafts / Sculpting, Molding & Ceramics / Modeling / Clay Rollers & Brayers

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

The little kit that puts big power in your hands

THIS LISTING IS FOR THE PARTS KIT WITH WHITE BASE PLATE - SEE MY OTHER LISTINGS FOR MORE COLORS! 


The new 3rd generation NEVERknead is now a Parts Kit (you provide the arbor press (it is not included) you easily assemble and get to the business of kneading and conditioning polymer clay fast! Good News: it's more economical than previous generations and features all the power.


ARBOR PRESS NOT INCLUDED.


The kit creates a polymer clay kneading tool that works for all clay! STOP kneading polymer clay and NEVERknead instead. Save time, save your hands. The NEVERknead is the first and only tool that will dramatically improve the way you work with polymer clay. Choose from many different fun Base Plate colors to match your studio.


NEVERknead FEATURES

  • requires very little physical exertion with 1/2 ton of pressure
  • takes up very little space in your studio
  • kneads small and large blocks of polymer clay
  • easy quick clean up between colors
  • simple and easy to use
  • FASTER clay conditioning - faster than manual knead or pasta machine
  • FASTER color MIXING
  • Great for TEXTURE stamping
  • kneads all brands of clay including SCULPEY, FIMO, CERNIT, PARDO, KATO, and more
  • can also be used for ceramic clay (pottery) WEDGING!
  • Bolt Set included to bolt it down for better stability
  • easy assembly
  • woman-owned, invented, and made (I designed/coded this site too)
  • Base Plate available in lots of pretty colors to match your studio
  • conditions clay smooth and ready for your creations
  • best of all: you literally NEVER KNEAD


The NEVERknead Proprietary Parts Kit Includes:

  • white Stomper
  • 1/4" thick acrylic Base Plate
  • yellow clamp
  • bolt set
  • 2 part epoxy with wood mixing stick
  • 2x alcohol pads
  • 3M adhesive strips
  • sticker label
  • hot pink padded bag

Say goodbye to painful hand-pressing your polymer clay, and say hello to more creativity!

 

YOU provide: 

  • any 1/2 ton (.5 ton capacity) arbor press (not included)
  • optional but recommended: drill with 3/8" drill bit (.375) to bolt NEVERknead to your work table to make it more stabile

THIS PARTS KIT ONLY FITS 1/2 TON ARBOR PRESSES


How to purchase


Because I'm now focusing solely on providing you the best polymer clay conditioning parts, you'll need a half ton arbor press (not included). The NEVERknead Parts Kit works with any 1/2 ton arbor press, just make sure it's a half ton or .5 version. The 1-ton versions are too large and won't fit the Kit. 


1. make sure you have a 1/2 ton arbor press (not included with this kit)


2. order your Parts Kit by clicking ADD TO CART above

Once you have your half ton arbor press and Parts Kit you are ready to assemble your NEVERknead Parts Kit.




Stop the Pain and Start Creating!

 

Once your NEVERknead is assembled (with your arbor press) you can do these amazing things:



Great for color blending!

Less than 7 minutes - black and white blended to gray - start to finish.

Great for texture stamping!

Exerts even pressure to stamp designs into your clay.


___________________________________________ 


People are talking about the NEVERknead! 


Read what polymer clay expert, Lisa Pavelka, says about The NEVERknead in Polymer Cafe magazine October 2016 - see listing images above to read review


See what CINDY LIETZ, the PolymerClayTutor, says About NEVERknead:

see listing images above to read review



Jeannie Havel of pcPolyzine writes:

"...I was obsessed and in awe of this magical device..."

read more of her praise - see listing images above to read review




SEE NEVERknead Assembly Video

WATCH 1 MINUTE VIDEO IN THE IMAGES SECTION (above) OF THIS LISTING!



___________________________________________________________________________



Who Invented The NEVERknead? 



My name is Debra Ann.

I'm a polymer clay artist.

And I was in pain from kneading.

So I invented a solution.


Well, that's the short 'n sweet answer. The long answer is that I struggled for years kneading clay by hand, and developed a very painful condition in my left shoulder and neck, plus an ugly whoppin' callous on my hand.


For years I searched for a better way to knead clay, to no avail. I couldn't believe there was nothing out there. Then I started experimenting with some ideas and in March of 2014 came up with a prototype of the current NEVERknead. I've been perfecting it ever since then and I'm thrilled to present it to you now.


It is my sincere hope to make your life as a polymer artist better and help you create your art faster and without any potential pain or discomfort from hand-kneading. I know NEVERknead works. I use it 100% for my own polyclay art. I never hand-knead. Ever.

-- Debra Ann inventor/owner The NEVERknead 


___________________________________________________________________________




  30 DAY RISK FREE GUARANTEE 


Try it for 30 days risk free. If you are not satisfied with the NEVERknead for any reason, return it within 30 days (at your expense), and your full purchase price will be refunded (less any shipping). 


If you have any problems or questions at any time with the NEVERknead, contact me right away. 



___________________________________________________________________________ 


Demand for The NEVERknead Polymer Clay Kneading Machine is high


Demand for this Polymer Clay Kneading Machine is high - they are flying out the door (that's a funny thought)! So... get your order in today, the sooner you do, the sooner you will be NEVERkneading your clay and saving your hands, neck, and shoulders, and your precious time. 


BUY YOURS NOW

FREE SHIPPING (within USA)



NOTE: THIS PARTS KIT REQUIRES  A 1/2 TON ARBOR PRESS (not included)


NOTES ON THE NEVERKNEAD PARTS KIT


* A lot of people have requested a Parts Kits because they already have an arbor press, or would prefer to get one on their own. 


I have phased out the full NEVERkneads (the ones that include the arbor press) because I lost my helper and I am not able to move around and process pallets of 20lb arbor presses on my own. Rather than ceasing to offer the NEVERknead which has helped countless polymer clay enthusiasts worldwide, I will be exclusively offering only the Parts Kits.



STOP KNEADING CLAY! WHITE NEVERknead DIY PARTS KIT Polymer Clay Condition Tool
shape
See more
Price type
IN STOCK OUT STOCK